DynaVap "M" Stainless Steel Pocket-Sized Lighter-Powered Vaporizer

DynaVap "M" Stainless Steel Pocket-Sized Lighter-Powered Vaporizer 22190

+ CLICK IMAGES TO ZOOM

DynaVap "M" Stainless Steel Pocket-Sized Lighter-Powered Vaporizer 22190 DynaVap "M" Stainless Steel Pocket-Sized Lighter-Powered Vaporizer 22190 DynaVap "M" Stainless Steel Pocket-Sized Lighter-Powered Vaporizer 22190

Dynavap Vaporizers

$69.95

Sorry, this product is temporarily out of stock.

DynaVap "M" Stainless Steel Pocket-Sized Lighter-Powered Vaporizer 22190

THE "M"
PRODUCT NUMBER: VCM 113-73-15-00

Our New DynaVap ‘M’ is deployed for use straight from the VapLab with the intent of providing the highest quality, durability and experience for an extremely reasonable price. The 'M' is created utilizing 100% Stainless Steel of medical grade to the exact dimensions of the original VapCap. The quality of our newest addition remains consistent with our entire line of products with an additional robust durability. Like all DynaVaps the 'M' arrives equipped with our signature temperature indicating cap providing simplicity and efficiency for all.

Product Characteristics
Midsection: Stainless Steel
Condenser: Standard
Mouthpiece: Stainless Steel
Total Length: 92 mm

ABOUT DYNAVAPS:
Dynavap devices require no batteries or electronics to work, but rather utilize any heat source, such as a butane torch lighter, to heat a temperature indicating cap on a conduction/convection chamber.

Each model weighs less than half an ounce. Models are 10mm in circumference and 92mm overall length. The exceptions are the VonG models with a bigger 14mm circumference and XLS models with a longer 109mm overall length.

The condenser tube serves as a heat exchanger to condense and cool the vapor as it travels through the device. In addition, the condenser tube provides an easy to clean component for vapor to travel and keep your midsection material clean from residue.

DynaVap offers only the best materials for our products and fortunately customers can compare metals when buying tips, condensers and screens. The titanium components are all Grade 2 titanium and the stainless steel components are medical grade stainless steel. There are a few performance characteristics in each metal within the device as well. When compared with stainless steel, titanium is lighter weight and three to four times stronger offering optimal durability and lifespan. However stainless steel is cost effective and more scratch-resistant.

Our titanium tips offer a faster heat up time and distribute heat more evenly than the stainless steel counterpart. In addition, the titanium tips have three adjustable screen positions and have a titanium screen, while the stainless steel tips only offer one position and have a stainless steel screen. Both the titanium tips and the stainless steel tips are compatible with most DynaVap components, with the exception that stainless steel tips do not function properly with the Omni condenser assembly.

We recommend that you use a butane torch lighter for optimal results. To ensure even heating, apply the heat to the cap, away from the end, and rotate the device steadily until you hear/feel a click. Directly heating the end of the cap will cause it to click prematurely, causing reduced vaporization.

DO NOT apply heat past the click. Overheating will permanently damage the cap.

With a torch lighter and a titanium tip, the typical heat-up phase takes 3-6 seconds and remains at vapor production temperature until the cool down click about 30 seconds later. After the cool down click, it is safe to begin another heating cycle. When using a soft flame lighter, the heat-up phase takes about 15 seconds. The stainless steel tip requires a longer heat-up time than the titanium tip.

Our Degummed Hemp Fiber has multiple uses. It can be used in the tip of the device as an adsorbent for extracts, or a filter under the screen to catch the very fine particles. Just a pinch in the tip will help keep your device clean. It can also be used to clean the condenser. Simply push a ball of it through a warm condenser from the mouthpiece end and the ball of fiber will wipe the tube out nicely.

Cleaning: All non wood components are dishwasher safe. Most components of the device can be disassembled by pulling apart. The OmniVap condenser threads into the mouthpiece. Glass and metal parts may be soaked in hot water or a cleaning solution of your choice. Do NOT clean with alcohol or other flammable liquids. Doing so may damage the condenser quad rings and any wood components. We suggest using DynaWax to maintain the polish on the wood as well as lubricating the o-rings for reassembly. Reassemble components to match the original assembly. When re-inserting, push pieces of the device together, adding lubricant and a slight twist to ease rubber o-rings in place.

There are a couple of ways to remove the scorch marks and soot from the stainless steel cap. Wash the cap with warm water and apply any of the following suggestions: metal polish, steel wool or a baking soda and vinegar mix. Scorch marks are part of the normal use patina, but to prevent soot buildup when using a soft flame lighter, keep the cap deep in the blue part of flame and try to minimize the amount of yellow flame. This will avoid the soot causing yellow part of the flame contacting the cap, as well as provide a more even heat distribution around the cap.

Stock # 22190

All Prices are in Canadian Dollars. We accept these payment methods (and Interac E-Transfer):